The Installation of Shanghai Rotorcomp Screw Air Compressor
1 ,Selection of installation site
Attention should be paid to the choice of installation location and specific planning. The problems that may arise are contained in the germination stage to ensure the effective and stable operation of the screw air compressor.
The installation location of the screw air compressor should be selected in a place with a wide space and good lighting, which can facilitate the installation of the body and the implementation of future maintenance and overhaul work. The installation of the screw air compressor needs to select a relatively dry place with good air circulation and less dust, which can extend the service life of the equipment. If the factory environment is poor and there is a lot of dust, the front filter equipment should be properly installed to protect it. In terms of ambient temperature, it should not be too high. Generally, it should be installed below 40 degrees Celsius. Excessive temperature will build the air delivery capacity when the equipment is operating, thus reducing the efficiency of the equipment to a certain extent.
At the same time, it is necessary to reserve a passage before installation.
If conditions permit, you can also set up a crane, which can provide greater convenience for future maintenance work. In general, at least 70 cm or more is required between the compressor and the wall as a reserved maintenance space . The air compressor should not be less than one meter away from the top space.