400 Cfm Compressors for Sale

The product features of the compressor: 1) Best combination of brand-name motivation according to different powers to achieve the best combination of performance. 2) Efficiency maximization. 3) The ultra low vibration technology and a unique noise control system make the noise lower. 4) An easy operation, a simple running state, and an easy and quick maintenance. Matters of attention： When we first start the compressor or the power line changes, we must pay attention to the correct direction of the rotation of the motor in order to prevent the loss of oil from the head. The position of the diesel air compressor on the ground must be flat, and the ground cannot be soft soil. In charge of piping, the pipeline must have 1-2 angle to the downward slope. When piping, the welding spark is strictly forbidden to fall into the diesel air compressor, so as to avoid the burning of some parts in the air compressor. In the power distribution, select the correct power line diameter and confirm the correctness of the voltage. On the power supply line, the air switch, fuse wire and other safety devices must be installed. When replenishing the lubricating oil, make sure that the system has no pressure before opening the fuel filler cap. In the operation of the unit, do not loosen or remove any pipe accessories, joints and devices. The unit is filled with high pressure and high temperature liquid, which can cause serious personal injury accidents. The safety valve is installed on the seat of the oil separator. Once the gas pressure exceeds the set pressure in the system, the gas will be released through this valve. We must check the cause of overpressure. Before any mechanical maintenance on a diesel air compressor, the following preparatory work must be done: Cut off the power switch to ensure that the air compressor is in the state of power failure and the pressure in the unit has been reduced to atmospheric pressure.