Shanghai Rotorcomp Screw Compressor Co., Ltd.
  • Rotary Screw Compressor Historical well-known manufacturer producing quality screw compressor,oil free compressor,high pressure compressor in ISO,TUV,CE certificates with good price, 5 years warranty, patented unique design, more energy-saving , reliable compressor system for al Rotary Screw Compressor
  • Oil Free Compressor Shanghai rotorcomp screw compressor offer 100% clean oil free air compressor that can be made in air cooled &water cooled, we can customize according to the special requests, and OEM service... Oil Free Compressor
  • Air Treatment Systems After-processing equipment of compressorISO,CE,TUV,ASME standard manufacturer producing quality Refrigerated air dryer,Desiccant air dryer, precised pipe filter from 1micron to 0.001micron, active-car... Air Treatment Systems
  • Diesel Movable Screw Compressor Diesel movable screw compressorReliable diesel portable screw compressor manufacturer producing quality diesel screw compressor from 50cfm--1600cfm@100psi-500psi in ISO,TUV,CE certificates with good p... Diesel Movable Screw Compressor
  • Screw Air End SCREW AIR ENDWorld-top Rotorcomp compact air screw compressor with best efficient in smaller demension in ISO,TUV certificates, 5 years warranty.Rotorcomp oil-injected screw air ends create the heart ... Screw Air End
Tel: +86-021-67150020
Fax: +86-021-67150020
Add: No.28 Minta Road, Songjiang District Shanghai, China

Selection of the Installation Place for Small-scale High Pressure Air Compressor

Clicks: 1444
The normal operation of small high pressure air compressor absolutely depends on the proper installation environment, which is the necessary condition to ensure the normal operation of high pressure air compressor. If the installation conditions can not be met, then everything can only be empty talk. So, what are the requirements of the environment for the installation of small high pressure air compressors?

1. According to the requirements of the Code for the Design of Compressed Air Stations, the heating temperature between machines in compressed air stations should not be lower than 15 C, and the temperature between machines in non-working hours should not be lower than 5 C.
2. Reserve passage and maintenance space. According to the requirements of Code for Design of Compressed Air Station, the passage width between small-scale high pressure air compressor units and the wall is 0.8-1.5m distance according to the exhaust volume.
3. Choose a wide area with good lighting to ensure the required space and lighting during the operation, maintenance and repair.
4. When the suction port of the small-scale high pressure air compressor or or the cooling air suction port of the unit is set in the room, the indoor ambient temperature should not be higher than 40 degrees.
5. Choose places with low air humidity, less dust, more fresh air and good ventilation to avoid water mist, acid mist, oil mist, and the environment with a lot of dust and fibre.
6. When the exhaust volume of a single compressed air station is equal to or greater than 20m?/min, and the total installed capacity is equal to or greater than 60m?/min, it is advisable to install crane equipment for overhaul, and its lifting capacity should be determined according to the z* heavy parts of small air compressor units.
7. If the environment of the factory is poor and there is much dust, it is necessary to install the pre-filtration equipment to ensure the service life of the parts of the small-scale high pressure air compressor system.
When we choose the installation environment of the high pressure air compressor, we must be careful. If we neglect this, the high pressure air compressor can not work well for us at all.
Relate News
  • TEL:+86-021-67150020
  • FAX:+86-021-67150020
  • ADDRESS:No.28 Minta Road, Songjiang District Shanghai, China